Agilent Technologies Agilent E6474A - Manual (Page 176)

176 Agilent E6474A User’s Guide
D Permanent In-Vehicle Hardware Installation
Cellular antennas
Your system may include magnetic-mount or permanent mount
antennas, depending on the order.
1 Identify the antennas.
2 Install permanent-mount antennas according to the antenna
manufacturer’s instructions.
3 Route the antenna cables through the vehicle to the area
where the system is installed.
4 If equipped, attach the antenna adapters to the antenna
cable, then connect the adapter to the phone. See Table 1 on
page 39 for adapter part numbers.
Computer mount installation
If your system includes a computer mounting kit, follow the
installation instructions packaged with it. Refer to the
computer manufacturer’s documentation to identify the
computer connectors.
1 Install the computer mounting kit.
2 Attach the computer to the mounting bracket.
3 Connect the USB data cable to the USB port of the computer.
4 Connect the power cable to the computer.
5 Connect the opposite end of the power cable to the lighter
socket.