Agilent Technologies Agilent E6474A - Manual (Page 18)

18 Agilent E6474A User’s Guide
2 Installing the Software
Install Analysis Reporter software
The Analysis Reporter (Agilent E6474A-758) option is a
simple-to-use post-processing report tool. It quickly generates
network performance overview and detailed network analysis
reports.
Follow these steps.
Once the installation has completed you are returned to the
installation dialog box.
Do This Notes
1 Insert the Agilent E6474A CD. This CD contains the required
software device drivers.
2 Your system may have autostart or go to
the Start button, click Run and type D:\
setup (where D is your CD drive).
The installation dialog box
appears (see below).
3 Select Install next to the E6474A Option
758 Analysis Reporter option.
Before selecting this option you
can find out more by clicking the
information button.
4 Follow the installation instructions If you have a previous version of
Analysis Reporter installed on
your PC your will be prompted to
over-write with the newer
version.
Select this option