Agilent Technologies Agilent E6474A - Manual (Page 82)

82 Agilent E6474A User’s Guide
4 Use Your System
Identify devices
To identify the devices, perform the following procedure (this
example uses a phone attached to COM port 1). All system
components should be connected and powered on.
1 Right-click on COM1 in the System Setup view. A popup
menu appears, as shown in Figure 41 .
Figure 41 System setup view showing pop-up menu
2 Select the Refresh Port option.
3 Once the device is identified a message dialog box appears.
4 Click:
• Yes if you want to update the COM port.
• No if you do not want to update the COM port.
• Details>> to view the devices found on the COM port.
When the device has been identified it will be added to the
System Setup View tree. See
Figure 42 .
NOTE
If you are sure which device is connected to the selected port, you can
reduce refresh time by using the Manual Refresh option. A second menu
is displayed showing the devices you are currently licensed to use. You can
then select the device that is connected to the selected port.