Agilent Technologies Agilent E6474A - Manual (Page 155)

System Information C
Agilent E6474A User’s Guide 155
Weight 2.1 kg (4.6 lbs)
Power
Power (internal GPS, Option 200) 9 to 34 V DC, 9W
9 to 34 V DC, 10W
Transformer AC Power (supplied with
receiver) 100 - 240 Volts AC 50 - 60 Hz
Internal GPS
‡
(Option 200)
GPS Receiver 8 Channel internal GPS receiver
Connector type SMA
Differential compatible without dead reckoning
Note: Internal GPS is standard on all “C” receivers. It can be disabled if you wish to use an external
GPS system.
* It is recommended the input signal level not exceed – 25 dBm.
† Adjacent channel desensitization applies to the wideband mode (1.25 MHz IF Filter) and is defined as: 1 dB compression of
tuned signal with interfering signal ±1.25 MHz from tuned signal.
‡ Receivers (with the exception of “C” receivers) fitted with an internal GPS do not support connection to external GPS receiv-
ers.
Item Description Specification