Pulse trigger the receiver – Agilent Technologies Agilent E6474A User Manual
Page 45
Advertising
Set Up Your System
3
Agilent E6474A User’s Guide
45
Figure 16
Connecting more than one receiver to your laptop
Pulse trigger the receiver
The E645xC receivers accommodate a pulse trigger device. The
triggering device requirements are:
• Cable with BNC male connector (the Agilent pulse trigger
cable input is female BNC)
• Falling-edge trigger
• TTL threshold
• 15 volt maximum pulse level
• 100 nanosecond minimum pulse width of period
Advertising