Agilent Technologies Agilent E6474A - Manual (Page 47)

Set Up Your System 3
Agilent E6474A User’s Guide 47
GPS and GPS/DR
Overview
To provide accurate measurement analysis and signal
synchronization, the Agilent E6474A system provides
comprehensive methods of support for Global Positioning
Systems (GPS).
The Agilent E6474A system obtains its GPS signal from a variety
of sources. GPS systems can be connected and configured using
the following methods:
Agilent digital receiver internal GPS
All Agilent digital receivers are supplied with an internal GPS
system. When an Agilent digital receiver is connected to your
system, this GPS device is automatically detected. GPS signals
are passed to your system through the serial connection.
Agilent digital receiver external GPS
The following examples show a complete system with various
external GPS systems attached through an Agilent digital
receiver. These examples show the external GPS and receiver
connected to a PC, however the same connection can be made to
the AUX port on the E6473B hub. Refer to
Figure 18 on page 48.
GPS and GPS/DR configuration Refer to
Agilent digital receiver internal GPS page 47
Agilent digital receiver external GPS page 47
External GPS using the E6473B hub page 51
Agilent GPS/DR navigator page 51
Indoor positioning page 54