Agilent Technologies Agilent E6474A - Manual (Page 43)

Set Up Your System 3
Agilent E6474A User’s Guide 43
Connections for receiver 2
1 Connect RX LOOP IN on receiver 1 to RX LOOP OUT on
receiver 2 using cable E6450-60002.
2 Connect RX LOOP OUT on receiver 1 to RX LOOP IN on
receiver 2 using cable E6450-90001.
3 Connect power on receiver 2 to Aux Out socket on the
E6473B hub using cable E6473-60091.
Refer to Figure 15 on page 43.
Figure 15 Data and power connection for two receivers
E6473-60106
to RF antenna
to optional GPS
to vehicle power
E6473B Hub
Receiver 2
to RF antenna
Receiver 1
E6473-60091
E6450-60002
E6450-60001