Agilent Technologies Agilent E6474A - Manual (Page 42)

42 Agilent E6474A User’s Guide
3 Set Up Your System
Connect to the E6473B hub
An Agilent digital receiver can be connected to the E6473B hub
using the receiver port (marked with
) on the back of
the hub. The receiver cable (E6473-60006) splits into a data
cable and power cable. Refer to
Figure 14 .
Figure 14 Data and power connection for one receiver
Connect two receivers to your in-vehicle E6473B hub
The E6473B hub provides an additional power socket for
powering a second Agilent digital receiver.
Connections for receiver 1
1 Connect the RS-232 port on the receiver 1 to the receiver
port on the hub ( ) using the cable E6473-60106.
2 Connect the power lead part of the E6473-60106 cable to
receiver 1 power socket.
E6473-60006
to
RF antenna
to optional GPS
to vehicle power
E6473B Hub
Receiver