Agilent Technologies Agilent E6474A - Manual (Page 177)

Permanent In-Vehicle Hardware Installation D
Agilent E6474A User’s Guide 177
Cable Installation
Phone extender cables
Route the extender cables (E6473-60042) from the vehicle
interior to the location where the Direct Connect Hub is
installed, then follow the phone cable connection instructions
in
Chapter 3 .
USB data cable
Route the USB data cable (E6473-60010) from the vehicle
interior to the location where the Direct Connect Hub is
installed, then follow the USB cable connection instructions in
Chapter 3. If your system includes two Direct Connect Hub
units, see Chapter 3.
Main power cable
A permanent install cable (E6473-60206) is included. The
following installation instructions are for the permanent install
power cable.
The leads for this cable are color-coded as follows:
• The red lead is power (+)
• The black lead is ground (-)
• The white lead is ignition sense
WARNING
It is recommended that you disconnect the vehicle’s battery before
making any connections to the vehicle power.
This task should be done by a qualified vehicle electrician.