Verifying installation using the device manager – Agilent Technologies Agilent E6474A User Manual
Page 35
Advertising
Set Up Your System
3
Agilent E6474A User’s Guide
35
Verifying Installation using the Device Manager
To verify the driver installation:
1 Connect and switch on the E6473B hub.
2 Select Start > Settings > Control Panel.
3 Select System.
4 Select the Hardware tab.
5 Select the Device Manager button.
6 Expand the device tree to see the active ports. Refer to
Figure 9
Device Manager showing E6473B ports
Advertising