Identifying devices – Agilent Technologies Agilent E6474A User Manual
Page 81
Advertising
Use Your System
4
Agilent E6474A User’s Guide
81
Identifying devices
The software must identify the attached devices before it can
communicate with them. Devices include phones, Agilent digital
receivers, and the navigator (if equipped). This process is also
referred to as “configuring the system.”
More information on identifying devices and system
configuration can be found in the online help and quick basics.
Refer to
NOTE
Generic data devices are configured differently than phones used in
conversation mode. See
on page 88 for setup
information.
NOTE
If you are using the E6473B hub and are uncertain about which COM ports
are assigned and need assistance in determining which COM port is
assigned to each specific device, refer to
Advertising