How to connect other devices to the e6473b hub – Agilent Technologies Agilent E6474A User Manual
Page 31
Set Up Your System
3
Agilent E6474A User’s Guide
31
Refer to
on page 55 for more information about the
battery and how to use it.
How to connect a license key dongle to the E6473B hub
Once the E6473B hub has been configured and an adequate
power supply has been provided, it is possible to attach devices,
such as the USB license dongle.
The USB license dongle can be plugged into any of the three
USB ports
on the front of the hub. Refer to
Figure 6
Fit the USB dongle to any of three USB ports.
How to connect other devices to the E6473B hub
The E6473B hub is part of the E6474A measurement system.
Other parts of the system that the hub supports, include:
Attach USB License Dongle
System component
Refer to
Phones
Agilent digital receivers
GPS and GPS/DR
Batteries
Indoor setup