Teledyne LeCroy WaveAce 1000_2000 Remote Control - Manual (Page 15)

Operator's Manual
Display - Displaying Waveforms
Short Form Long Form What the Command/Query Does
DTJN DOT_JOIN
Controls the interpolation lines between data points.
HMAG HOR_MAGNIFY Horizontally expands the expanded trace.
HPOS HOR_POSITION Horizontally positions intensified zone's center.
INTS INTENSITY Controls the brightness of the grid.
PERS PERSIST
Enables or disables the persistence display mode.
PESU PERSIST_SETUP Selects display persistence duration.
SCSV SCREEN_SAVE Enables or disables the screen saver.
TRA TRACE Enables or disables the display of a trace.
Miscellaneous
Short Form Long Form What the Command/Query Does
*CAL? *CAL? Performs a complete internal calibration.
*IDN? *IDN?
Returns device identification data.
ACAL AUTO_CALIBRATE Performs periodic calibration of instrument. Supported only on
WaveAce 2000 series.
BUZZ BUZZER Controls the buzzer in the instrument.
CHDR COMM_HEADER Controls formatting of query responses.
DEF DEFINE
Specifies mathematical function to perform.
DIR DIRCTORY Creates or deletes file directories on mass storage devices.
FLNM FILENAME
Changes default filename of traces, setups and hard copies.
Save/Recall Setup - Making and Restoring Front Panel Settings
Short Form Long Form What the Command/Query Does
*RST *RST Initiates a device reset.
*SAV *SAV Stores current state in internal memory.
RCPN RECALL_PANEL Recalls a front panel setup from mass storage.
920836 Rev B 13