Acquisition - bandwidth_limit, bwl, Command syntax, Query syntax – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual
Page 23: Response format, Example
Advertising
Operator's Manual
ACQUISITION - BANDWIDTH_LIMIT, BWL
The BWL command enables or disables the bandwidth limit (low-pass filter) of the specified input
channel.
The BWL? query returns the enabled/disabled status. If all the channels are in the same state, it
returns the state; if not, it returns each individual channel state.
Command Syntax
BandWidth_Limit <channel>,<mode>[,<channel>,<mode>...]
<channel>:= {C1, C2, C3, C4}
<mode>: = {ON, OFF}
Query Syntax
BWL?
Response Format
BWL <mode>
Example
This instruction sets a low-pass filter on Channel 2:
BWL C2,ON
920836 Rev B
21
Advertising