Teledyne LeCroy WaveAce 1000_2000 Remote Control - Manual (Page 28)

WaveAce Remote Control
ACQUISITION - TIME_DIV, TDIV
The TIME_DIV command modifies the timebase setting. The new timebase setting can be specified with
units: N/NS for nanoseconds, U/US for microseconds, M/MS for milliseconds, or S for seconds.
Alternatively, you can use exponential notation: 10E-6.
The
TIME_DIV? query returns the current timebase setting.
Command Syntax
Time_DIV <value>
<value>:=
Refer to datasheet specification for your Teledyne LeCroy oscilloscope at at
teledynelecroy.com.
The default unit S (seconds) is optional.
Query Syntax
Time_DIV?
Response Format
Time_DIV <value>
Example
The following instruction sets the time base to 500 µs/div:
TDIV 500US
The following instruction sets the time base to 2 msec/div:
TDIV 0.002
Related Commands
TRIG_DELAY, TRIG_MODE
26 920836 Rev B