Acquisition - trig_mode, trmd, Command syntax, Query syntax – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual
Page 32: Response format, Example, Related commands
Advertising
WaveAce Remote Control
ACQUISITION - TRIG_MODE, TRMD
The TRIG_MODE command specifies the trigger mode.
The TRIG_MODE? query returns the current trigger mode.
Command Syntax
TRig_MoDe <mode>
<mode>:= {AUTO, NORM, SINGLE, STOP}
Query Syntax
TRig_MoDe?
Response Format
TRig_MoDe <mode>
Example
The following instruction selects the normal mode:
TRMD NORM
Related Commands
ARM_ACQUISITION, FORCE_TRIGGER, STOP, TRIG_SELECT, TRIG_COUPLING,
TRIG_LEVEL, TRIG_SLOPE
30
920836 Rev B
Advertising