Teledyne LeCroy WaveAce 1000_2000 Remote Control - Manual (Page 51)

Operator's Manual
MISCELLANEOUS - *CAL?
The *CAL? query causes the oscilloscope to perform an internal self-calibration and generates a
response that indicates whether or not your oscilloscope completed the calibration without error. This
internal calibration sequence is the same as that which occurs at power-up. At the end of the
calibration, after the response has indicated how the calibration terminated, the oscilloscope returns
to the state it was in just prior to the calibration cycle.
Query Syntax
*CAL?
Response Format
*CAL? <diagnostics>
<diagnostics>:= 0 (calibration successful)
Response message (if no failure):
*CAL 0
MISCELLANEOUS - *IDN?
The *IDN? query causes the instrument to identify itself. The response comprises manufacturer,
oscilloscope model, serial number, and firmware revision level.
Query Syntax
*IDN?
Response Format
*IDN LECROY,<model>,<serial_number>,<firmware_level>
<model>:=
A six- or seven-character model identifier
<serial_number>:=
A nine- or 10-digit decimal code
<firmware_level>:=
major release, minor release, and update levels formatted xx.y.z
Example response message:
*IDN LECROY,WaveAce1012,LCRY2150C12345,5.01.02.09
920836 Rev B 49