Acquisition - trig_level, trlv, Command syntax, Query syntax – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual
Page 31: Response format, Example, Related commands
Advertising
Operator's Manual
ACQUISITION - TRIG_LEVEL, TRLV
The TRIG_LEVEL command adjusts the trigger level of the specified trigger source. An out-of-range
value will be adjusted to the closest legal value.
The TRIG_LEVEL? query returns the current trigger level.
Command Syntax
[<trig_source>]:TRig_LeVel <trig_level>
<trig_source>:= {C1,C2,C3,C4,EX5}
Query Syntax
<trig_source>:TRig_LeVel?
Response Format
<trig_source>:TRig_LeVel <trig_level>
Example
The following instruction adjusts the trigger level of Channel 2 to -3.4 V:
C2:TRLV -3.4V
Related Commands
TRIG_COUPLING, TRIG_DELAY, TRIG_MODE, TRIG_SELECT, TRIG_SLOPE
920836 Rev B
29
Advertising