Teledyne LeCroy WaveAce 1000_2000 Remote Control - Manual (Page 21)

Operator's Manual
ACQUISITION – ACQUIRE_WAY, ACQW
The ACQUIRE_WAY command specifies the acquisition mode.
The ACQUIRE_WAY? query returns the current acquisition mode.
Command Syntax
<channel>: ACQuire_Way <mode>[,<time>]
<channel>:= {C1,C2,C3,C4,EX,EX10}
<mode>:= {SAMPLING, PEAK_DETECT, AVERAGE}
<time>:= {4,16,32,64,128,256}
NOTE: The time parameter can only be set with the AVERAGE acquisition mode.
Query Syntax
<channel>:ACQUIRE_WAY?
Response Format
<channel>: ACQuire_Way <mode>[,<time>]
Example
The following command sets the acquisition mode to Average every 16:
C1:ATTN 100
Related Commands
AVGA, PDET
920836 Rev B 19