Display - dot_join, dtjn, Command syntax, Query syntax – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual
Page 44: Response format, Example
Advertising
WaveAce Remote Control
DISPLAY - DOT_JOIN, DTJN
The DOT_JOIN command controls the interpolation lines between data points. Setting DOT_JOIN ON
selects Points in the Display dialog; DOT_JOIN OFF selects Line.
Command Syntax
DOT_JOIN <state>
<state>:= {ON, OFF}
Query Syntax
DoT_JoiN?
Response Format
DoT_JoiN <state>
Example
The following instruction turns off the interpolation lines:
DTJN OFF
42
920836 Rev B
Advertising