Status - inr, Query syntax, Response format – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual
Page 67: Related commands, Inr status register structure, Operator's manual
Operator's Manual
STATUS - INR?
The INR? query reads and clears the contents of the INternal state change Register (INR). The INR
register records the completion of various internal operations and state transitions.
Query Syntax
INR?
Response Format
INR <value>
<value>:= 0 to 65535
Sample Response message:
INR 1026
Related Commands
ALL_STATUS, *CLS
INR Status Register Structure
Bit
Value
Description
15
0 - Reserved for future use.
14
16384
1 - Probe was changed.
13
8192
1 - Trigger is ready.
12
4096
1 - Pass/Fail test detected desired outcome.
11
2048
1 - Waveform processing has terminated in trace F4.
10
1024
1 - Waveform processing has terminated in trace F3.
9
512
1 - Waveform processing has terminated in trace F2.
8
256
1 - Waveform processing has terminated in trace F1.
7
128
1 - A disk exchange has been detected.
6
64
1 - Disk has become full in AutoStore Fill mode.
5
32
0 - Reserved for Teledyne LeCroy use.
4
16
1 - Segment of a sequence waveform has been acquired in acquisition memory but not yet
read out into the main memory.
3
8
1 - Time-out has occurred in a data block transfer.
2
4
1 - Return to the local state is detected.
1
2
1 - Screen dump has terminated.
0
1
1 - New signal acquired in acquisition memory and read out to the main memory.
920836 Rev B
65