Acquisition - trig_coupling, trcp, Command syntax, Query syntax – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual
Page 29: Response format, Example, Related commands
Advertising
Operator's Manual
ACQUISITION - TRIG_COUPLING, TRCP
The TRIG_COUPLING command sets the coupling mode of the specified trigger source.
The TRIG_COUPLING? query returns the trigger coupling of the selected source.
Command Syntax
<trig_source>:TRig_CouPling <coupling>
<trig_source>:= {C1,C2,C3,C4}
<coupling>:= {AC,DC,HFREI,LFREI}
Query Syntax
<trig_source>:TRig_CouPling?
Response Format
<trig_source>:TRig_CouPling <trig_coupling>
Example
The following instruction sets the coupling mode of the trigger source Channel 2 to DC:
C2:TRCP DC
Related Commands
TRIG_COUPLING, TRIG_DELAY, TRIG_LEVEL, TRIG_MODE, TRIG_SELECT, TRIG_SLOPE
920836 Rev B
27
Advertising