Avaya Sun Fire V880 - Manual (Page 118)

Maintenance
118 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
10. Enter: q
The format> prompt is displayed.
11. Enter:
format
The following message is displayed:
12. Enter: y
A message similar to the following is displayed:
13. If you added more than one disk drive, enter disk, and repeat Steps 2 through 12 for
each drive.
14. After you have partitioned each drive, enter: q
15. Continue with the restore procedures as described in Setting up replacement disk
drives on page 112.
Ready to format. Formatting cannot be interrupted
and takes XX minutes (estimated). Continue? (y or n)
Begin format. The current time is <timestamp>
Formatting...
done
Verifying media...
pass 0 - pattern = 0xc6dec6de
4923/26/7
pass 1 - pattern = 0x6db6db6d
4923/26/7
Total of 0 defective blocks repaired.
format>