Avaya Sun Fire V880 - Manual (Page 154)

Troubleshooting
154 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Redirecting the remote console back to the local console
!
CAUTION:
CAUTION:
Do not enter Ctrl+D from the remote console to exit the system without first
redirecting control back to the local console. If you do, you may lock yourself
from using the console locally or remotely.
To redirect control of the console port from the remote console back to the local console:
1. At the remote console, enter:
/cms/install/bin/abcadm -c local
The following message is displayed at the remote console:
2. At the remote console, enter: y
The following occurs:
●
The system begins to shut down.
●
Shutdown, reset, and reboot messages are displayed on the local console.
●
When the system starts to come back up, the system boot diagnostics are displayed
on the local console.
●
After the system reboots, the console login: prompt is displayed on the remote
console.
●
The login screen is displayed on the local console.
3. Log in to the local console as root.
4. Log in to the remote console as root.
Control of the console port is redirected from the remote console back to the local
console.
Console set to local
This change requires a reboot to take affect
Are you ready to reboot? [y,n,?]