Avaya Sun Fire V880 - Manual (Page 91)

Maintaining PCI cards
Issue 2.0 June 2004 91
8. Turn off any external SCSI devices, starting with the device that is closest to the
system and working toward the farthest device.
9. Open the left door.
10. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See Using an ESD wrist strap on page 58 for more
information.
11. Identify the slot in which you want to install the HSI/P card. Slot 4 is recommended for
the second HSI/P card.
12. Pinch the purple PCI card retaining clip until it releases from the back of the card and
rotate the clip outward. See the following figure.
13. If not already done, remove the filler panel from the slot.