Connecting the switch link, Connecting the switch, Link – Avaya Sun Fire V880 User Manual
Page 34
Installation
34 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Connecting the switch link
Use either of the following two ways to connect the CMS computer to a switch:
●
TCP/IP over a local area network (LAN)
●
X.25 protocol over a hard-wired or switched link (not supported for CMS R12 and later)
One CMS computer can collect data from several switches. To the CMS computer, each
switch represents one ACD. You can have all switches connected using TCP/IP, all
switches connected using X.25 protocol (not supported for CMS R12 and later), or some
combination of the two protocols.
For detailed information about how to connect and administer the switch link, see Avaya
Call Management System Switch Connections, Administration, and Troubleshooting.