Avaya Sun Fire V880 - Manual (Page 141)

Maintaining CPU/Memory boards
Issue 2.0 June 2004 141
2. Remove the plastic cover on the CPU/Memory board. Push the tabs in until you can lift
the cover free of the CPU/Memory board shroud. See the following figure.
3. Identify which modules you are removing.
4. Applying even pressure on both levers, push down on the ejection levers at each end
of the memory module until the memory module pops out of the socket. See the
following figure.
5. Grasp the top corners of the memory module and pull it up and out of the socket.
6. Place the memory module on an antistatic mat or in an antistatic bag.
7. Push down on the ejection levers at each end of the sockets.