Avaya Sun Fire V880 - Manual (Page 121)

Maintaining disk drives
Issue 2.0 June 2004 121
11. Wait for the green light on the drive you just installed to light steadily (not flashing)
before installing another drive.
12. Repeat Steps 2 through 11 for the data disk installed in slot 5.
13. Close the front door and, if necessary, lock it.
14. Enter:
cmssvc
The CMS Services menu is displayed.
Note:
Note:
If the system also displays the following message, you must first turn on IDS
before continuing with Step 15.
15. Enter the number that corresponds to the disk_space option.
16. Enter the number that corresponds to the Add new disks option.
The disks to be added are displayed.
17. Enter the number that corresponds to the disks you want to add.
The system administers the new disks, which may take several minutes depending on
the number and size of the disks. The following message is displayed:
Note:
Note:
Depending on the size of the disks, the system may run slowly until all disks
are synchronized.
cmssvc: Warning IDS off-line. It will take approx 30 seconds to start
cmssvc. IDS can be turned on with the run_ids command on the cmssvc
menu.
added new disk cXtXd0
disk_space command completed.