Avaya Sun Fire V880 - Manual (Page 135)

Maintaining tape drives
Issue 2.0 June 2004 135
34. Enter:
probe-scsi-all
In its default configuration, the computer should list two SCSI devices: the internal tape
drive (Target 5) and the DVD-ROM drive (Target 6).
35. Reboot the system by entering the following commands:
!
CAUTION:
CAUTION:
If you fail to enter these commands, any reboots that you do in the future will
stop at the boot prompt instead of proceeding through the normal boot-up
process.
setenv auto-boot? true
boot -r
This reboots the system so that it recognizes the new configuration.