Avaya Sun Fire V880 User Manual
Page 98
Maintenance
98 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
22. Turn on any external SCSI devices, starting with the device that is farthest from the
system and working toward the system.
23. Turn on the system monitor.
24. Turn on the system.
25. When the system comes back up, log in as root.
After replacing the RSC card, you must restore the RSC configuration settings. These
procedures are described in the following sections of the CMS software installation,
maintenance, and troubleshooting document for your CMS release:
●
"Customizing Sun Remote System Control" and "Testing Sun Remote System Control"
in the chapter "Turning the system over to the customer"
●
"Backing up and restoring the RSC card configuration" in the chapter "Maintaining the
Avaya CMS software"
In addition, the replacement card has a new Ethernet MAC address, which may
necessitate configuration changes to other network devices. To determine the Ethernet
MAC address for the new RSC card, use the RSC command shownetwork. For more
information, see the Sun Remote System Control User's Guide at the Sun documentation
Web site: