Avaya Sun Fire V880 - Manual (Page 54)

Maintenance
54 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Turning on the computer
1. Turn on any external SCSI devices, starting with the device that is farthest from the
system and working toward the system.
2. Turn on the system monitor.
3. Turn the key switch to the normal On position. See the following figure.
4. Press and release the power button to the left of the key switch to turn on the system.
Note:
Note:
The POST diagnostics occurs each time that you turn on the system. The
POST tests the basic system components. This may take several minutes.
If the system is operating properly, a banner screen is displayed, as shown below, up
to 3 minutes after it is turned on.
5. Log in to the system as root.
|------| Sun Fire 880, Keyboard Present
| | Copyright 1998-2001 Sun Microsystems, Inc. All rights reserved.
| | OpenBoot 4.4, XXX MB memory installed, Serial #XXXXXXXXX
|------| Ethernet address X:X:XX:XX:XX:XX, Host ID: XXXXXXXX