Redirecting the rsc to the local console – Avaya Sun Fire V880 User Manual
Page 160
Troubleshooting
160 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Redirecting the RSC to the local console
To redirect the RSC to the local console:
1. Enter from the RSC:
/usr/sbin/shutdown -y -i0 -g0
The ok prompt is displayed.
!
CAUTION:
CAUTION:
If the shutdown command fails, press Stop + A simultaneously after the
display console banner is displayed, but before the operating system starts
booting.
2. Enter the following commands to set the local console environment:
setenv diag-console ttya
setenv input-device keyboard
setenv output-device screen
3. Enter:
reset-all
The system reboots and the RSC is directed to the local console.
Additional references - For more information about the RSC card and software, see Sun
Remote System Control (RSC) User’s Guide at the Sun documentation Web site: