ADTRAN 600R User Manual

Page 127

Advertising
background image

Total Access 600 Series System Manual

Section 4 User Interface Guide

61200624L1-1B

© 2004 ADTRAN, Inc.

125

P

UBLIC

P

ORT

This menu appears when the

P

UBLIC

P

ORT

M

ODE

is set to

S

PECIFIED

. Use this

option to specify the public port number to translate. Some well known
TCP/UDP port numbers are shown below:

Port Number

Keyword

Port Type

20

FTP (data)

File Transfer Protocol Data

21

FTP (control) File Transfer Protocol Control

23

Telnet

TCP/IP terminal emulation utility

666

DOOM

DOOM

53

DNS

Domain Name Server

69

TFTP

Trivial File Transfer Protocol

80

HTTP

Hypertext Transfer Protocol

110

POP3

Post Office Protocol ver. 3

P

RIVATE

A

DDRESS

M

ODE

Choose

A

NY

I

NTERNAL

(default) or

S

PECIFIED

to choose which address to use for

the private address. The private IP address can be specified to filter certain
protocols and ports to specific servers in the private network. Likewise, internal
hosts can be steered to certain servers on the public network. A new request
from the public network that matches this entry’s public parameters is dropped
if the

P

RIVATE

A

DDRESS

M

ODE

is set to

A

NY

I

NTERNAL

(with the exception of

protocols that the internal router is expected to respond to, such as ICMP or
SNMP).

P

RIVATE

A

DDRESS

This menu appears when the

P

RIVATE

A

DDRESS

M

ODE

is set to

S

PECIFIED

, and

allows the user to enter a specific private IP address for this translation. Packets
destined for the public IP address (of this translation) are redirected to the
private IP address specified here.

P

RIVATE

P

ORT

M

ODE

Select

A

NY

P

ORT

(default) or a

S

PECIFIED

port number for this translation. The

private destination port associated with this entry can be specified to provide
more control over certain types of traffic. Leave configured as

A

NY

P

ORT

to

cover all port types.

P

RIVATE

P

ORT

M

ODE

This menu appears when the

P

RIVATE

P

ORT

M

ODE

is set to

S

PECIFIED

, and allows

the user to enter the port number that replaces the public port number during the
translation of incoming packets. Outgoing packets from the private address
space that match this protocol are sent to the specified public address and port, if
any.

Advertising
This manual is related to the following products:

604, 624, 612, 606, 616