ADTRAN 600R - Manual (Page 199)

Total Access 600 Series System Manual Section 5 DLP-5
61200624L1-1B © 2004 ADTRAN, Inc. 197
11. Press <CTRL+L> to log off the Total Access 6XX terminal menu system.
12. From a remote computer system connected to the LAN, Telnet to the Total Access 6XX.
The following screen appears.
13. Enter the user name assigned in step 5 and press enter. The following screen appears.
Refer to the documentation of the computer system if you are unsure how to perform a
Telnet. Most computers running a networked version of Microsoft Windows™ or UNIX
allow a Telnet to be performed by simply typing “Telnet <IP Address>” at a command line
prompt. Telnet is a utility common on many local area networks that allows remote access
to another computer or piece of equipment.