ADTRAN 600R - Manual (Page 58)

Section 4 User Interface Guide Total Access 600 Series System Manual
56 © 2004 ADTRAN, Inc. 61200624L1-1B
S
YSTEM
C
ONFIG
> M
ANAGEMENT
> SNMP M
ANAGEMENT
> T
RAPS
Sets up the trap manager name and IP from this menu.
S
YSTEM
C
ONFIG
> M
ANAGEMENT
> FDL M
ANAGEMENT
Enables the FDL management and configures mode and IP addresses from this menu.
P RIVILEGE
The access for this manager can be assigned three levels. The factory default is N ONE
.
N ONE
No access is allowed for this community or manager.
G ET
Manager can only read items.
G ET /S ET
Manager can read and set items.
M ANAGER IP
This may be used in conjunction with the Netmask field to define a range of manager IPs. A netmask
of 255.255.255.255 defines a single IP as the manager host IP. A
M ANAGER IP defined as 192.22.1.0
with a N ETMASK
of 255.255.255.0 allows all managers on the 192.22.1.0 network access to the
SNMP information. The default value is 0.0.0.0 .
N ETMASK
The mask is used to determine which bits of the M ANAGER IP are significant. A "0" bit means "don't
care." A "1" bit means that the corresponding address bits in the incoming SNMP packet must match
the address bit in the defined
M ANAGER IP . The netmask of 255.255.255.255 defines a single IP as the
manager host IP. A M ANAGER IP defined as 192.22.1.0 with a N ETMASK
of 255.255.255.0 allows all
managers on the 192.22.1.0 network access to the SNMP information. The default value is 0.0.0.0 .
#
Displays the index number in the SNMP traps table. This list allows up to 20 managers to be listed to
receive traps.
M ANAGER N AME
The text string describing the name of the entry. It is intended for easy reference and has no bearing
on the SNMP trap function. You can enter up to 31 characters in this field. The factory default is no
entry in the
M ANAGER N AME
field.
M ANAGER IP
This is the IP address of the manager that is to receive the traps. The factory default is 0.0.0.0 .