ADTRAN 600R - Manual (Page 146)

Section 4 User Interface Guide Total Access 600 Series System Manual
144 © 2004 ADTRAN, Inc. 61200624L1-1B
N AME
Identifies the filter entry. Default is no entry in name field.
F ILTER T YPE
Specifies a N ORMAL
or D EBUG
filter. When a N ORMAL
filer is applied to an interface, traffic is blocked
or forwarded according to the filter. When a D EBUG
filter is applied, packets that match the filter are
documented without affecting traffic flow. (Use the D EBUG
filter with the Syslog or Terminal Mode
logging to view the packet contents.)
S RC A DDR
IP address compared to the source address. Value is in dotted decimal format. Default is 0.0.0.0 .
S RC M ASK
Bits which are used in the source comparison. Value is in dotted decimal format. Default is 0.0.0.0 .
D EST A DDR
IP address compared to the destination address. Value is in dotted decimal format. Default is 0.0.0.0.
D EST M ASK
Bits which are used in the destination comparison. Value is in dotted decimal format. Default is
0.0.0.0.
S RC P ORT
IP source port number used for comparison. Value is in decimal format. Range: 0 - 65535 . Default is
0 .
S RC P ORT C OMP
Type of comparison that is performed. Default is N ONE
.
= means ports equal to
NOT = means port not equal to
> means port greater than
< means port less than
None - means the source port is not compared
D EST P ORT
IP destination port number used for comparison. Value is in decimal format. Range: 0 - 65535 .
Default is 0 .