ADTRAN 600R - Manual (Page 131)

Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 129
R OUTER > C ONFIG > DHCP S ERVER > DHCP S ERVER
Use this menu to enable the DHCP server ( O N
or O FF
).
R OUTER > C ONFIG > DHCP S ERVER > DHCP A DDRESS P OOLS
Configures the parameters for the various defined DHCP address pools. Multiple DHCP address pools
may be defined using these menus.
N UM
Displays the index number of the defined DHCP address pools. Multiple address pools are valid, and
all will be listed in sequential order. This number is for reference only.
N AME
Enter a user-defined alphanumeric text string for the defined DHCP address pool. This text string is
for easy identification and reference only.
T YPE
Configures the DHCP address pool as either a Network or Host pool.
L EASE C ONFIG
Configures the lease duration for an IP address from this pool assigned by the DHCP server to a host
on the network.
L EASE D AYS , H OURS , M INUTES
Defines the lease duration (in days, hours, and minutes) for an IP address from this pool assigned
by the DHCP server to a host on the network.
N ETWORK A DDRESS
Defines the network address for the configured address pool (for example, 172.24.0.0). The
N ETWORK A DDRESS
and N ETWORK M ASK
determine the number of addresses available on the
network for the configured pool.
N ETWORK M ASK
Defines the network mask associated with the network address for the configured address pool
(for example, 255.255.0.0). The
N ETWORK A DDRESS
and N ETWORK M ASK
determine the number
of addresses available on the network for the configured pool.
P OOL I NFO
Configures various network parameters assigned to all hosts given an IP address from the configured
address pool.