ADTRAN 600R - Manual (Page 148)

Section 4 User Interface Guide Total Access 600 Series System Manual
146 © 2004 ADTRAN, Inc. 61200624L1-1B
S ECURITY > F ILTERS > I NTERFACES > S ET - UP
Enable packet blocking or forwarding and apply pre-defined filter exceptions from this menu.
I NCOMING
The packets received on the selected interface can be filtered in three ways:
D ISABLE ( DEF ) Turns off packet input filtering. No incoming packets are blocked.
B LOCK A LL All incoming packets from the interface are blocked except as defined in
the
S ECURITY > F ILTERS > I NTERFACES > S ETUP > I N E XCEPTIONS
list.
F ORWARD A LL All incoming packets from the interface are not blocked except as defined
in the
S ECURITY > F ILTERS > I NTERFACES > S ETUP > I N E XCEPTIONS
list.
I N E XCEPTIONS
Define exceptions to the forward/block all rules established using the I NCOMING
field. The
Total Access 6XX allows for a list of up to 32 filter entries which are performed in the order they
appear on the list.
#
Indicates the entry number in the In Exceptions table.
A CTIVE
Turns this entry active when set to Y ES
. Default is N O
.
T YPE
Selects the filter define list to reference (default is MAC ).
MAC from the S ECURITY > F ILTERS > F ILTER D EFINES > MAC F ILTER D EFINES
list.
P ATTERN from the S ECURITY > F ILTERS > F ILTER D EFINES > P ATTERN F ILTER
D EFINES list.
IP from the S ECURITY > F ILTERS > F ILTER D EFINES > IP F ILTER D EFINES list.
F ILTER L IST N AME
Selects between filters defined in the list. Default is no entry in filter list name.