ADTRAN 600R - Manual (Page 175)

Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 173
8
Select S ETUP , and from the S ETUP menu, enter the Gateway type under C ALL
C ONTROL and enter the VPI and VCI values for communicating with that
Gateway.
For this application, C
ALL C ONTROL and virtual identifier (VPI and VCI) values
should be set appropriately for your network.
9
To verify correct setup, use the PVC S TATUS menu (under the S TATUS menu
located at L2 P ROTOCOL [0] > S TATUS ) to look at the current status of the voice
connection.
Under S
TATUS , view information about the voice PVC along with information
about the POTS ports available on the unit.
Layer 2 Protocol Configuration – T1 Interface (Continued)