ADTRAN 600R - Manual (Page 247)

Total Access 600 Series System Manual Section 6 ADTRAN Utilities
61200624L1-1B © 2004 ADTRAN, Inc. 245
Session Menu
Click on S ESSION
to open the Telnet session.
Connect
Opens dialog box for setting H OST N AME
and
P ORT
parameters for a Telnet session. Also lets
you E DIT E NTRY
, A DD N EW
entry, and D ELETE
stored entries. When the parameters are set, click
C ONNECT
to make the connection. Click C ANCEL
to end the session.
Host Name
Accepts and stores host names. You may enter either a name, an IP address, or a domain name directly
from this field. Click on the drop-down arrow to display a complete list of previously stored host
names.
Port
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
Edit Entry
Changes either the unit name or the IP address of each host.
Press either
Tab, Return, or a period ( . ) after each number in
the IP address to move to the next field. If you press Return
or enter a period while the cursor is located in an IP field,
that field entry is deleted.
Add New
Prompts you for the same information as the E DIT E NTRY
dialog box for new host. When enabled, the U SE DNS (Domain Name Server) feature allows users to
request D OMAIN L OOK U P
via a DNS server on the network, rather than specifying an IP address. The
name then appears in the H OST N AME
field.
Delete
Removes a host name from the list; select the host name you want to remove, and, at the prompt, click
D ELETE
.
Connect
Establishes the Telnet session.
T ELNET establishes a Telnet session
E CHO provides a loopback for troubleshooting
D ISCARD bit bucket; discards data
D AYTIME returns the time
C HARGEN displays as a unique character stream; used for self-tests