ADTRAN 600R - Manual (Page 118)

Section 4 User Interface Guide Total Access 600 Series System Manual
116 © 2004 ADTRAN, Inc. 61200624L1-1B
L2 P
ROTOCOL
(A
LL
F
IRMWARE
) – ETH I
NTERFACE
> 802.3 P
ROTOCOL
Configure the L2 PROTOCOL
parameters and view the status of the Ethernet interface from this menu.
L2 P
ROTOCOL
(ALL–ETH–802.3) > P
ROTOCOL
Displays the L2 P ROTOCOL
for the 10/100BaseT Ethernet port. Currently only 802.3 is supported.
L2 P ROTOCOL (ALL–ETH–802.3) > C ONFIG
Configure the mode for this 10/100B ASE T Ethernet port from this menu.
L2 P
ROTOCOL
(ALL–ETH–802.3) > C
ONFIG
> M
ODE
The mode identifies how the data will be forwarded. The choices are:
L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS
View the L2 P ROTOCOL
statistics for the 10/100B ASE T Ethernet port from this menu.
L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS > T X P ACKETS
Total number of packets transmitted out the Ethernet port.
L2 P
ROTOCOL
(ALL–ETH–802.3) > S
TATUS
> R
X
P
ACKETS
Total number of packets received from the Ethernet port.
L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS > T X E RRORS
Total number of transmit errors encountered on Ethernet port.
L2 P
ROTOCOL
(ALL–ETH–802.3) > S
TATUS
> S
INGLE
C
OLLISIONS
Total number of single collisions before successful transmission.
L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS > M ULTIPLE C OLLISIONS
Total number of multiple collisions before successful transmission.
L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS > E XCESSIVE C OLLISIONS
Total number of collisions that resulted in packet being dropped.
L2 P
ROTOCOL
(ALL–ETH–802.3) > S
TATUS
> D
EFERRED
T
RANSMISSIONS
Total number of packets deferred due to collisions.
L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS > C ARRIER S ENSE E RRORS
Total number of carrier sense errors encountered (no link integrity).
R OUTE IP (def) All IP data will be routed
B RIDGE A LL All data will be bridged
R OUTE IP/B RIDGE OTHER All IP data will be routed. All other data will be bridged.