Dlp-10 loading a configuration using tftp, Dlp-10, Loading a configuration using tftp – ADTRAN 600R User Manual
Page 213
61200624L1-1B
© 2004 ADTRAN, Inc.
211
DLP-10 Loading a Configuration Using TFTP
Introduction
The Total Access 6XX supports configuration uploads from a unit (via the
10/100BASET
Ethernet port) to
a TFTP server located on the network. This DLP provides the steps to follow for a successful configuration
upload using the
10/100BASET
Ethernet port and a TFTP Server.
Tools and Materials Required
•
A PC with a Telnet client software
•
A TFTP Server accessible on the local network (A TFTP server is provided with the unit as part of the
ADTRAN Utilities software.)
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place equipment in antistatic packing material when transporting or storing.
When working on equipment, always place it on an approved antistatic mat that is
electrically grounded.