ADTRAN 600R - Manual (Page 49)

Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 47
Getting Help
The bottom line of the terminal menu window contains context-sensitive help information. When the
cursor is positioned over a set of configuration items, a help message displays (when available) providing a
description of the item. When more detailed help is available for a particular item, ^A displays at the
bottom of the window. At this point, pressing <CTRL+A> displays a pop-up help screen with information
about the item.
Press <CTRL+Z> to activate a help screen that displays the available keystrokes you can use to navigate
the main menu system. Press <Exit> to remove these help screens.
2. MAIN MENU AND SYSTEM CONTROL
Selecting the Appropriate Menu
The main menu system is the access point to all other operations. Each menu item has several functions
and submenus that identify and provide access to specific operations and parameters. Use the following
chart to help select the appropriate menu.
Delete a list item
For example, delete an item from the T
ELNET U SER connection list by pressing
<D> while the index number is active.
D
To do this... Go to this menu...
Review and monitor general system information for the Total Access 6XX S YSTEM I NFO
Set up the operational configuration for the Total Access 6XX S YSTEM C ONFIG
Upgrade firmware, perform config transfers, ping, and access terminal mode S YSTEM U TILITY
Review and configure settings for all interfaces (including installed modules) I NTERFACES
Configures the Layer 2 protocol for the various interfaces (T1, Ethernet, etc.)
and provides all applicable L2 status information L2 P ROTOCOL
Configure the bridging parameters and view applicable bridging statistics B RIDGE
Define, configure, and monitor all Total Access 6XX Router functions R OUTER
Configure security filters for L2 traffic and define RADIUS server parameters S ECURITY
Map data and voice ports (from integrated interfaces as well as installed
modules) to network time slots DS0 M APS
To do this... Press this key...