ADTRAN 600R - Manual (Page 95)

Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 93
L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > R X P KTS
Number of packets received on the T1 interface.
L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > T X B YTES
Number of bytes transmitted on the T1 interface.
L2 P
ROTOCOL
(TDM–T1–PPP) > S
TATUS
> R
X
B
YTES
Number of bytes received on the T1 interface.
L2 P
ROTOCOL
(TDM–T1–PPP) > S
TATUS
> C
URRENT
U
TIL
(b/s)
Current utilization of the T1 interface bandwidth presented in bits per second.
L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > C URRENT U TIL (%)
Current utilization of the T1 interface bandwidth presented in percentage format.
L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > A VERAGE U TIL (b/s)
Average utilization of the T1 interface bandwidth (since the last stats reset) presented in bits per second.
L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > A VERAGE U TIL (%)
Average utilization of the T1 interface bandwidth (since the last stats reset) presented in percentage format.
L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > T X P KTS
Number of packets transmitted on the T1 interface
L2 P
ROTOCOL
(TDM–T1–PPP) > S
TATUS
> C
LEAR
S
TATS
Clears the PPP stats (returning the counters to 0) for the T1 interface.
L2 P
ROTOCOL
(TDM F
IRMWARE
) – T1 I
NTERFACE
> FRE P
ROTOCOL
Configure the L2 P ROTOCOL
parameters and view the status of the T1 interface using Frame Relay protocol
from this menu.
L2 P
ROTOCOL
(TDM–T1–FRE) > C
ONFIG
Configure the L2 P ROTOCOL
parameters for the T1 interface using the Frame Relay protocol.