Hub configuration – Brocade TurboIron 24X Series Configuration Guide User Manual
Page 1015
Advertising
Brocade TurboIron 24X Series Configuration Guide
981
53-1003053-01
Sample 802.1X configurations
TurboIron(config)#interface e 3
TurboIron(config-if-e10000-3)#dot1x port-control auto
TurboIron(config-if-e10000-3)#exit
Hub configuration
illustrates a configuration where three 802.1X-enabled Clients are connected to a hub,
which is connected to a port on the device. The configuration is similar to that in
,
except that 802.1X port security is enabled on only one port, and the multiple-hosts command is
used to allow multiple Clients on the port.
FIGURE 121
Sample 802.1X configuration using a hub
Advertising