Brocade TurboIron 24X Series Configuration Guide - Manual (Page 452)

418 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Displaying VLAN information
Example
Displaying VLAN information
After you configure the VLANs, you can verify the configuration using the show commands
described in this section.
Displaying VLANs in alphanumeric order
VLANs are displayed in alphanumeric order, as shown in the following example.
TurboIron#show vlan
Total PORT-VLAN entries: 3
Maximum PORT-VLAN entries: 16
legend: [S=Slot]
PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree Off
Untagged Ports: (S1) 1 2 3 4 5 6 7 8
Untagged Ports: (S2) 1 2 3 4 5 6 7 8 12 13 14 15 16 17 18 19
Untagged Ports: (S2) 20 21 22 23 24
Tagged Ports: None
Uplink Ports: None
DualMode Ports: None
PORT-VLAN 10, Name [None], Priority level0, Spanning tree Off
Untagged Ports: (S2) 10
Tagged Ports: None
Uplink Ports: None
DualMode Ports: (S2) 11
PORT-VLAN 20, Name [None], Priority level0, Spanning tree Off
Untagged Ports: None
Tagged Ports: (S2) 9
Uplink Ports: None
DualMode Ports: (S2) 11