Displaying cpu utilization statistics – Brocade TurboIron 24X Series Configuration Guide User Manual

Page 636

Advertising
background image

602

Brocade TurboIron 24X Series Configuration Guide

53-1003053-01

Displaying CPU utilization statistics

Displaying CPU utilization statistics

You can display CPU utilization statistics for RIP and other IP protocols.

To display CPU utilization statistics for RIP for the previous one-second, one-minute, five-minute,
and fifteen-minute intervals, enter the following command at any level of the CLI.

If the software has been running less than 15 minutes (the maximum interval for utilization
statistics), the command indicates how long the software has been running. Here is an example.

Subnet Mask

The network mask for the IP address.

Neighbor filters

The rows underneath “RIP Neighbor Filter Table” list the RIP neighbor filters. If no RIP neighbor filters are
configured on the device, the following message is displayed instead: “No Filters are configured in RIP Neighbor
Filter Table”.

Index

The filter number. You assign this number when you configure the filter.

Action

The action the router takes for RIP route packets to or from the specified neighbor:

deny – If the filter is applied to an interface outbound filter group, the filter prevents the
router from advertising RIP routes to the specified neighbor on that interface. If the
filter is applied to an interface inbound filter group, the filter prevents the router from
receiving RIP updates from the specified neighbor.

permit – If the filter is applied to an interface outbound filter group, the filter allows the
router to advertise RIP routes to the specified neighbor on that interface. If the filter is
applied to an interface inbound filter group, the filter allows the router to receive RIP
updates from the specified neighbor.

Neighbor IP
Address

The IP address of the RIP neighbor.

TABLE 97

CLI display of RIP filter information (Continued)

This field...

Displays...

TurboIron#show process cpu

Process Name

5Sec(%)

1Min(%)

5Min(%)

15Min(%)

Runtime(ms)

ARP

0.01

0.03

0.09

0.22

9

BGP

0.04

0.06

0.08

0.14

13

ICMP

0.00

0.00

0.00

0.00

0

IP

0.00

0.00

0.00

0.00

0

OSPF

0.00

0.00

0.00

0.00

0

RIP

0.04

0.07

0.08

0.09

7

STP

0.00

0.00

0.00

0.00

0

VRRP

0.00

0.00

0.00

0.00

0

Advertising