Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1017)

Brocade TurboIron 24X Series Configuration Guide 983
53-1003053-01
Sample 802.1X configurations
TurboIron(config)#interface e 1
TurboIron(config-if-e10000-1)#dot1x port-control auto
TurboIron(config-if-e10000-1)#dot1x multiple-hosts
TurboIron(config-if-e10000-1)#exit
802.1X Authentication with dynamic VLAN assignment
Figure 122 illustrates 802.1X authentication with dynamic VLAN assignment. In this configuration,
two user PCs are connected to a hub, which is connected to port e2. Port e2 is configured as a
dual-mode port. Both PCs transmit untagged traffic. The profile for User 1 on the RADIUS server
specifies that User 1 PC should be dynamically assigned to VLAN 3. The RADIUS profile for User 2
on the RADIUS server specifies that User 2 PC should be dynamically assigned to VLAN 20.
FIGURE 122 Sample configuration using 802.1X authentication with dynamic VLAN assignment