Brocade TurboIron 24X Series Configuration Guide - Manual (Page 896)

862 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
IGMP V3
Clearing IGMP statistics
To clear statistics for IGMP traffic, enter the following command.
TurboIron#clear igmp traffic
Syntax: clear igmp traffic
This command clears all the multicast traffic information on all interfaces on the device.
ToIN Number of times the interface mode changed from exclude to include.
ToEX Number of times the interface mode changed from include to exclude.
ALLOW Number of times that additional source addresses were allowed or denied on the interface.
BLK Number of times that sources were removed from an interface.
TABLE 134 Output of show ip igmp traffic (Continued)
This field Displays