Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1085)

Brocade TurboIron 24X Series Configuration Guide 1051
53-1003053-01
Appendix
A
Syslog messages
Table 176 lists all of the Syslog messages. Note that some of the messages apply only to Layer 3
Switches. The messages are listed by message level, in the following order, then by message type:
• Emergencies (none)
• Alerts
• Critical
• Errors
• Warnings
• Notifications
• Informational
• Debugging
NOTE
This appendix does not list Syslog messages that can be displayed when a debug option is enabled.
TABLE 176 Brocade Syslog messages
Message level Message Explanation
Alert <num-modules> modules and 1 power
supply, need more power supply!! Indicates that the chassis needs more
power supplies to run the modules in the
chassis.
The <num-modules> parameter indicates
the number of modules in the chassis.
Alert Fan <num>, <location>, failed A fan has failed.
The <num> is the fan number.
The <location> describes where the failed
fan is in the chassis.
Alert ISIS MEMORY USE EXCEEDED IS-IS is requesting more memory than is
available.
Alert MAC Authentication failed for
<mac-address> on <portnum> RADIUS authentication was successful for
the specified <mac-address> on the
specified <portnum>; however, the VLAN
returned in the RADIUS Access-Accept
message did not refer to a valid VLAN or
VLAN ID on the device. This is treated as an
authentication failure.
Alert MAC Authentication failed for
<mac-address> on <portnum> (Invalid User) RADIUS authentication failed for the
specified <mac-address> on the specified
<portnum> because the MAC address sent
to the RADIUS server was not found in the
RADIUS server users database.